Zhone Technologies 5620 Benutzerhandbuch

496-14952

97-15303c

Ethernet

Line

Ferrite
Choke

3. Place the large ferrite choke on the 

Ethernet cable as closely as possible to 
the RTU. Pass the Ethernet cable through 
the ferrite choke twice, creating a loop as 
shown.

4. Close the two halves 

around the cable and 
snap the ferrite choke 
shut. Press down on the
plastic latch to secure
the ferrite choke in place 
around the cable.

5. Insert the power cord’s round end into the jack labeled POWER. Attach the ferrite

choke on the power cord as closely as possible to the RTU. Pass the power cable
through the ferrite choke twice, creating a loop as shown.

97-15796

Power

Jack

or

Ferrite
Choke

6. Close the two halves around the cable and snap the ferrite choke shut. Press

down on the plastic latch to secure the ferrite choke in place around the cable.

7. Plug the transformer into an AC outlet. The RTU hardware installation is now

complete. When the power cord is installed, the RTU goes through a power-on
self-test.