RATOC Systems CBFW3 Benutzerhandbuch

When you want to capture a video image from a DVCAM set to camera mode, follow steps

through.

1. Confirm a DVCAM is set to camera mode.

   Camera mode means you can capture a video image. If your DVCAM is in video mode,

   change mode selection switch from video mode to camera mode slowly. Everytime you change

   DVCAM’s Mode Control switch, move this switch to OFF position and confirm that the

   RsDvCap’s Camera device name will disappear. After that, you can change this switch to your

   choice and the camera device name will appear.

2. Select [DV mode] on the [Application Setting] as shown in 4-3.Application settings.

3. Click the                 button on the Camera Control  bar. A video image from a DVCAM

    will appear.

4. Click the                                           button to start capturing.

5.Click the                                         button to stop capturing.

   You can also stop capturing by using the                 button on the Camera Control Bar or

    pressing ESC button on the keyboard.

6. If you checked [Rename file name every capture execution] on the [Application Setting],

    You will see the window.You can

    rename the captured file.

7.The file will be saved in the folder

   you set at [Set Folder Name To Save

   Capture Files] on the [Application

   Setting].