Grandstream Networks HT503 FXS/FXO Benutzerhandbuch

 

Range: 0 – 3600, default is 300 

The maximum uplink bandwidth permitted by the device.  This function is disabled by 
default. The total bandwidth can be set as: 128K, 256K, 512K, 1M, 4M or 10M.   
For example if 64 is configured, there will be at least 64kbps reserved for VoIP.  The 
primary function of this setting is to reserve bandwidth for VoIP. 

The maximum downlink bandwidth permitted by the device.  This function is disabled 
by default. The total bandwidth can be set as: 128K, 256K, 512K, 1M, 4M or 10M.   
For example if 128 is configured, there will be at least 128kbps reserved for VoIP.  The 
primary function of this setting is to reserve bandwidth for VoIP. 

When set to “Yes”, the HT503 acts as an UPnP gateway for your UPnP enabled 
applications.  UPnP = “Universal Plug and Play” 

When set to “Yes”, the HT503 responds to the PING command from other computers, 
but is also made vulnerable to DOS attacks.  Default is No. 

When set to “Yes”, the user can access the web configuration pages through the WAN 
port, instead of through the PC port.  Warning: this configuration is less secure than the 
default option.  Default is No. 

This allows the user to change/set a specific MAC address on the WAN interface.  
Note: Set in Hex format 

Sets the LAN subnet mask. Default value is 255.255.255.0 

Base IP for the LAN port, which functions as default gateway for its LAN. Default value 
is 192.168.2.1 

The length of time the IP address is assigned to the LAN clients.  Value is set in units of 
hours.  Default value is 120 hrs (5 days).   

This function forwards all WAN IP traffic to a specific IP address if no matching port is 
used by HT503 or in the defined port forwarding. 

Allows users to forward a matching (TCP/UDP) port to a specific LAN IP address with a 
specific (TCP/UDP) port. 

The code to access the PSTN line (Maximum 5 digits). Default is “*00”. 

PIN code to bridge from VoIP to PSTN (Maximum 8 digits, No Default) 

PIN code to bridge from PSTN to VoIP (Maximum 8 digits, No Default) 

If the dialed digits match one of the specified prefix here, outbound calls will be initiated 
from PSTN line. This field is especially useful for emergency calls.   

Calls are unconditionally forwarded to the specified PSTN phone number for all 
incoming VoIP calls on FXO port. 

Calls are unconditionally forwarded to the specified VoIP phone number for all 
incoming PSTN calls.  

Grandstream Networks, Inc. 

Page 21 of 35