Honeywell HC900 Benutzerhandbuch

Installation Guide - Overview 

50 

  HC900 Hybrid Controller Installation and User Guide 

Revision 5 

  

9/03 

1 

Referring to Site Planning Documentation, ensure that 
sufficient numbers of the following items are on hand: 

• 

Racks (4-, 8- and 12-slot)  

• 

Power Supplies (1 per rack) 

• 

Controller Module or Scanner (1 per rack) 

• 

I/O Modules (correct type for each configured slot) 

• 

Terminal Blocks, Barrier or Euro style, (1 for each I/O 
Module) 

• 

Jumpers 2-position or 10-position, (for designated 
Terminal Blocks) 

• 

Tie Wraps (1 or 2 for each Terminal Block) 

• 

I/O Label (one per terminal block, by module type) 

• 

Filler Block Cover (1 for each slot not occupied by an 
I/O Module)  

• 

Blank label (1 for each Filler Block Cover) 

• 

Grounding Bars for I/O wiring shields (1 or 2 for each 4-
slots in each rack) 

• 

Wiring terminal lugs (for connecting I/O shields to 
grounding bars) 

• 

Sheet metal screws, steel #10 or M4, for mounting racks 
in enclosures (4 screws for 4-slot racks, 8 screws for 8- or 
12-slot racks) 

Site Planning Documentation  

In this Manual: 

•  Section on Pre-Installation 

Planning. 

•  Sections on installation 

•  Appendix A 

 

2 

Install (or verify correct installation of) enclosures for HC900 
Controllers and ancillary equipment: 

• 

Mounting rails or flat-panels 

• 

(for cabinet with multiple HC900 Chassis): 

− 

grounding bus 

− 

barrier strip for AC power 

• 

Master control Relay 

Site Plan Documentation and 
this section of this manual 
 

 

 

 

 

 

3 

Install (or verify correct installation of) enclosures ("closets") 
for networking devices: 

Appendix A.  

Note : Some networking 
devices may share enclosures 
with HC900 Controller 
components.