Moxa Technologies 5400 Series Benutzerhandbuch

 

 

password, press SEL, etc. Once the password has been entered, press SEL until the LCM screen is 
activated. 

No or Yes 

No 

Required 

Options are No and Yes, with default = No.  

NOTE: Select the Yes option to allow limited use of the Reset Button. In this case, the Reset 
Button can be used for only 60 seconds. I.e., 60 sec. after booting up, the Reset Button will be 
disabled automatically. 

 

You must assign a valid IP address to the NPort 5410/5430/5430I/5450/5450I before it will work 
in your network environment. Your network system administrator should provide you with an IP 
address and related settings for your network. The IP address must be unique within the network 
(otherwise, the NPort 5410/5430/5430I/5450/5450I will not have a valid connection to the 
network). First time users can refer to Chapter 3, Initial IP Address Configuration, for more 
information. 

You can choose from four possible IP Configuration modes—Static, DHCP, DHCP/BOOTP, and 
BOOTP—located under the web console screen’s IP configuration drop-down box. 

Static 

User defined IP address, Netmask, Gateway. 

DHCP 

DHCP Server assigned IP address, Netmask, Gateway, DNS, and Time 
Server 

DHCP/BOOTP  DHCP Server assigned IP address, Netmask, Gateway, DNS, and Time 

Server, or BOOTP Server assigned IP address 

BOOTP 

BOOTP Server assigned IP address