Moxa Technologies 5400 Series Benutzerhandbuch

 

Broadcast Search 

The Broadcast Search function is used to locate all NPort 5400s that are connected to the same 
LAN as your computer. Since the Broadcast Search function searches by MAC address and not IP 
address, all NPort 5400s connected to the LAN will be located, regardless of whether or not they 
are part of the same subnet as the host. 

1.  Click the Search icon. The Broadcast Search window will open and display the Model, IP 

Address, MAC Address, and Progress of the search for that particular device. 

 

2.  When the search is complete, the Broadcast Search window will close, and a list of device 

servers that were located will be displayed in the right pane of the Administrator window. 
You can modify the IP address of the NPort 5400 after it has been located by the Broadcast 
Search function. If more than one server is found on the network, refer to the MAC address 
sticker on your server(s) to determine which server(s) you wish to configure. To configure a 
device server, place the cursor over the row displaying that device server’s information, and 
then double click the left mouse button. 

 

 

ATTENTION 

Before modifying the NPort 5400’s configuration, use Broadcast Search to locate all NPort 
5400s connected to the LAN, or use Specify by IP Address to locate a particular NPort 5400.

 

 

Specify by IP Address 

If you know the current IP address of the NPort that you wish to configure, you can add it to the 
list directly by using the Specify by IP Address function.