ZyXEL Communications P-870HW-51a v2 Benutzerhandbuch

 Chapter 7 Wireless LAN

P-870HW-51a v2 User’s Guide

Use this screen to set up a WPS wireless network using either Push Button 
Configuration (PBC) or PIN Configuration.

Click Network > Wireless LAN > WPS Station. The following screen displays.

Figure 45   Network > Wireless LAN > WPS Station

The following table describes the labels in this screen.

This screen allows you to configure the ZyXEL Device to give exclusive access to 
specific devices (Allow) or exclude specific devices from accessing the ZyXEL 
Device (Deny). Every Ethernet device has a unique MAC (Media Access Control) 

Table 23   Network > Wireless LAN > WPS Station

Push Button

Click this button to add another WPS-enabled wireless device (within 
wireless range of the ZyXEL Device) to your wireless network. This 
button may either be a physical button on the outside of device, or a 
menu button similar to the Push Button on this screen.

Note: You must press the other wireless device’s WPS button within 

two minutes of pressing this button.

Or input 
station's PIN 
number

Enter the PIN of the device that you are setting up a WPS connection 
with and click Start to authenticate and add the wireless device to your 
wireless network.

You can find the PIN either on the outside of the device, or by checking 
the device’s settings.

Note: You must also activate WPS on that device within two minutes 

to have it present its PIN to the ZyXEL Device.