ZyXEL Communications WAP3205 Benutzerhandbuch
WAP3205 User’s Guide
45
C
H A P T E R
6
Access Point Mode
6.1 Overview
The WAP3205 is set to access point mode by default. In this mode your WAP3205
bridges a wired network (LAN) and wireless LAN (WLAN) in the same subnet. See
the figure below for an example.
bridges a wired network (LAN) and wireless LAN (WLAN) in the same subnet. See
the figure below for an example.
Figure 20 Wireless Internet Access in Access Point Mode
Note: See
for an example of setting up a wireless network in
Access Point mode.
6.2 What You Can Do
• Use the Status screen (
) to view read-only information
about your WAP3205.
• Use the LAN screen (
) to set the IP address for your
WAP3205 acting as an access point.
• Use the Wireless LAN screens (
) to configure the
wireless settings and wireless security between the wireless clients and the
WAP3205.
6.3 What You Need to Know
See
for a tutorial on setting up a network with the
WAP3205 as an access point.