Multi-Tech Systems RJ-9 Benutzerhandbuch

Chapter 3 – Using the Web Management Software

Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375B)

PPP General

PPP

Enable/disable PPP. The default is Enable.

Dial-on-Demand:

Enable/disable Dial-on-Demand. The default is Enable. If you disable it, the modem
will always stay connected.

Idle Time Out:

Set the amount of idle time that will pass before the modem will timeout. The
default is 180 seconds.

Connect Time Out:

Set the number of seconds to wait for a connection while in receive mode before
timing out.

Dialing Max Retries:

Enter the number of dialing retries allowed. The default is zero, which means an
infinite number is allowed. Range 0 to 100.

Authentication

Authentication Type:

Set the authentication protocol type that will negotiate with the remote peer:
pap/chap/pap-chap. Default is pap-chap.

User Name:

Enter the User Name with which the remote peer will authenticate. Default is
ipmodule.

Password:

Enter the Password with which the remote peer will authenticate. Default is
ipmodule.

ICMP Keep Alive Check

Keep Alive Check:

Enable/disable the Keep Alive Check. The default is Disable.

Host Name:

Enter the Host Name.

Interval:

Default is 30 seconds.

Count:

Default is 10.

Modem Configuration

(Refer to the Customer Activation Notices included with the product for proper

information to enter).

Baud Rate:

Set the serial baud rate. Default is 115200.

Dial Number:

Set the dial number to be dialed. Default is NULL.

For EDGE or GPRS the number is *99***1#.

For

CDMA the number is #777.

Dial Prefix:

Set the modem dial prefix. The default is ATDT.

Connect String:

Set the modem Connect String. The default is CONNECT.

Init String:

Configure the modem init strings. Init-num can range from 1-5.

Submit Button

Click the Submit button to save these settings.

Note:

You must click Save and Restart once you have

completed and submitted all the screens on which you have made changes.