Multi-Tech Systems RJ-9 Benutzerhandbuch
Chapter 3 – Using the Web Management Software
Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375B)
37
Networks & Services
Networks & Services > Network Configuration
Networks or Hosts can be added here. The options to Delete or Edit a network after it has been defined and added
are available by using the table at the bottom of the screen.
are available by using the table at the bottom of the screen.
Network Configuration
Enter the Name, IP Address, and Mask for a new Network or Host.
Notes:
•
A Network/Host Name cannot be edited.
•
A Network/Host cannot be deleted if it is used in another configuration.
•
Network/Host changes are reflected in all the configurations in the Web Management software where
they are used.
they are used.
•
A Network/Host added here will be displayed in the following sections: Static Routes, DNAT, and
Packet Filters.
Packet Filters.
Name:
Enter the name of the Network/Host. The same address-mask pair should not already
be present in the displayed list.
be present in the displayed list.
IP Address:
Enter the IP Address of the Network/Host. The same address-mask pair should not
already be present in the displayed list.
already be present in the displayed list.
Subnet Mask:
Enter the Network Mask of the Network/Host. For Host addresses, the mask is entered
as 32.
as 32.
Note:
See Appendix A -- Table of Commonly Supported Subnets.
Add Button:
Click
the
Add button. The defined network is added and will display at the bottom of the
screen.