Multi-Tech Systems RJ-9 Benutzerhandbuch

Seite von 62
Chapter 1 – Introduction and Product Description 
Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375B) 
5 
 
Chapter 1 – Introduction and 
Product Description 
 
This User Guide describes the MultiModem
® Wireless EDGE, GPRS, and CDMA modems with an Ethernet 
Interface. 
Product and Interface Descriptions 
Ethernet Interface 
The MultiModem wireless modems with an Ethernet interface provide shared Internet access with one IP 
address. The built-in routing capabilities provide DHCP services and firewall security using Network Address 
Translation. Due to the routing capabilities, these modems are sometimes called routers. 
These modems support "always-on" network connection as well as "dial-on-demand" for Internet services. The 
"always-on" network connection automatically establishes a wireless data connection and allows for around the 
clock surveillance, monitoring or real-time data acquisition of any remote Ethernet device such as a Web 
camera. If the data link is dropped in the event of poor reception or a complete loss of service, it will 
automatically re-establish the data link. When configured for "dial-on-demand" the wireless modem only 
accesses the Internet when data is present. This configuration is ideal for sharing Internet access among 
networked PCs. 
Software features include remote configuration, firmware upgrade, load configuration screen, and a save 
configuration screen. 
 
MultiModem EDGE 
The MultiModem
®
 EDGE wireless modem delivers some of the fastest cellular wireless data speeds utilizing 
EDGE technology. It allows users to connect to the Internet and send and receive data up to three times faster 
than possible with an ordinary GSM/GPRS network making it ideal for highly data-intensive multimedia 
applications. The MultiModem EDGE wireless modem is equipped with quad-band GSM, which means it can be 
used worldwide on all existing GSM networks.  
AT Commands:
 The MultiModem EDGE wireless modem is configured using the EDGE AT 
Commands. These commands are documented in the Reference Guide for the MultiModem 
Wireless EDGE Modems, document number S000371x
 
MultiModem GPRS 
The MultiModem
®
 GPRS wireless modem offers standards-based multi-band GSM/GPRS Class 10 
performance. The ready-to-deploy, standalone data/fax/voice modem allows developers to add wireless 
communication to products with a miniumum of development time and expense. The MultiModem
®
 GPRS 
wireless modem is base on industry-standard open interfaces and can be desktop or panel mounted.  
AT Commands:  
The MultiModem GPRS wireless modem is configured using the GPRS AT 
Commands. These commands are documented in the Reference Guide for the MultiModem 
Wireless GPRS Modems, document number S000293x and also the Reference Guide for the 
GSM IP Commands, document number S000333x
 
 
MultiModem CDMA 
The MultiModem
®
 CDMA wireless modem offers standards-based multi-band CDMA200 1xRTT performance. 
The ready-to-deploy, standalone data/fax/voice modem allows developers to add wireless communication to 
products with a miniumum of development time and expense. The MultiModem
®
 CDMA wireless modem is base 
on industry-standard open interfaces and can be desktop or panel mounted.  
AT Commands:
The MultiModem CDMA wireless modem is configured using the CDMA AT 
Commands. These commands are documented in the Reference Guide for the MultiModem 
Wireless CDMA Modems, document number S000294x