Adtran 1000R Series Benutzerhandbuch
Command Reference Guide
VLAN Configuration Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
1163
VLAN C
ONFIGURATION
C
OMMAND
S
ET
To activate the VLAN Configuration mode, enter the vlan command at the Global Configuration mode
prompt. For example:
prompt. For example:
>enable
#configure terminal
(config)#vlan 1
(config-vlan 1)#
The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
of this guide. For more information, refer to the sections listed below:
All other commands for this command set are described in this section in alphabetical order.