ADC SG-1 Benutzerhandbuch
2-5
Installing Blank Faceplates
Use the blank faceplate identified in the
.
S
ERIAL
C
ABLE
!
IMPORTANT
Install blank faceplates in the SG-1 chassis to cover unused slots. Unused slots must be covered
to prevent personnel contact with back panel connectors under power and to maintain proper
airflow within the chassis.
to prevent personnel contact with back panel connectors under power and to maintain proper
airflow within the chassis.
Step
Action
1
Slide the blank faceplate into the empty slot. Ensure the retaining latches are lifted.
2
Push the blank faceplate in until the retaining latches touch the SG-1 chassis.
3
Gently close the retaining latches until they snap into place.
4
Tighten the captive screw on the top and bottom retaining latches.