Cisco Systems AIRCAP3602ITK9 Benutzerhandbuch

This Guide provides instructions on how to install and configure your Cisco Aironet 3600 Series 
Access Point and how to install any port modules. This guide also provides mounting instructions and 
limited troubleshooting procedures.

The 3600 Series Access Point is referred to as the access point in this document.

The 3600 series supports high-performing Spectrum Intelligence which sustains three spatial stream 
rates over a deployable distance with high reliability when serving clients. The 3600 series provides 
high reliability and overall wireless performance.

The 3600 series offers dual-band radios (2.4 GHz and 5 GHz) with integrated and external antenna 
options. The access points support full inter-operability with leading 802.11n clients, and support a 
mixed deployment with other access points and controllers.

The 3600 series access point is a controller-based (Unified) product and supports:

Simultaneous dual-band (2.4 GHz/5 GHz) radios

Integrated antennas on the 3602I access point model (AIR-CAP3602I-x-K9)

External antennas for rugged 3602E access point model (AIR-CAP3602E-x-K9)

The ‘x’ in the model numbers represents the regulatory domain. Refer to 

 for a list of supported regulatory domains.

The features of the 3600 series are:

Processing sub-systems (including CPUs and memory) and radio hardware which supports:

Network management

CleanAir—Automatic detection, classification, location and mitigation of RF interference

ClientLink+—BeamForming to 802.11n clients as well as legacy 802.11a/g OFDM clients 

VideoStream

Location

WIDS/WIPS

Security

Radio Resource Management (RRM)

Rogue detection

Management Frame Protection (MFP)