Cisco Systems AIRCAP3602ITK9 Benutzerhandbuch

To unpack the access point, follow these steps:

Unpack and remove the access point and the accessory kit from the shipping box.

Return any packing material to the shipping container and save it for future use.

Verify that you have received the items listed below. If any item is missing or damaged, contact 
your Cisco representative or reseller for instructions.

The access point

Mounting bracket (selected when you ordered the access point)

Adjustable ceiling-rail clip (selected when you ordered the access point)

The 3600 series access point contains two simultaneous dual-band radios, the 2.4-GHz and 5-GHz 
802.11n MIMO radios. The 3600 series access point configurations are:

AIR-CAP3602E-x-K9—two 2.4-GHz/5-GHz dual-band radios, up to 4 external dual-band 
diopole antennas

AIR-CAP3602I-x-K9—two 2.4-GHz/5-GHz dual-band radios, with integrated dual-band 
inverted-F antennas

For information on the regulatory domains (shown as “x” in the model numbers) see 

The 3602E model is configured with up to four external dual-band dipole antennas, and two 2.4-GHz/ 
5-GHz dual-band radios. The radio and antennas support frequency bands 2400–2500 MHz and 
5150–5850 MHz through a common dual-band RF interface. Features of the external dual-band 
dipole antennas are:

Four RTNC antenna connectors on the top of the access point

Four TX/RX antennas

These antennas are supported on the 3602E:

AIR-ANT2524DB-R

AIR-ANT2524DW-R