Actiontec electronic GT704WR Benutzerhandbuch
66
Actiontec 54 Mbps Wireless Cable/DSL Router User Manual
67
Chapter 8 Troubleshooting
Can my wireless signal pass through floors, walls, and glass?
The physical environment around the Router can have a varying effect on wire-
less signal strength and quality. The more dense an object, the greater the inter-
ference. Concrete or metal reinforced structures will experience a higher degree
of signal loss than those made of wood, plaster, or glass.
The physical environment around the Router can have a varying effect on wire-
less signal strength and quality. The more dense an object, the greater the inter-
ference. Concrete or metal reinforced structures will experience a higher degree
of signal loss than those made of wood, plaster, or glass.
I have an Apple computer that uses the Airport wireless device. Is this
device compatible with the Router?
Yes, the Apple Airport system complies with the 802.11b standards. If you use
the
device compatible with the Router?
Yes, the Apple Airport system complies with the 802.11b standards. If you use
the
WEP
security feature, refer to the Apple Airport documentation for infor-
mation on the proper method to enter the
WEP
key for compatibility with the
Router’s hexadecimal
WEP
entry.
What is the best placement for the Router to gain maximum throughput
and distance?
The best placement for the Router is in an elevated position, centrally located in
the area of service. To reduce the effect of physical barriers, place the Router in a
location with the least physical obstructions in the service area.
and distance?
The best placement for the Router is in an elevated position, centrally located in
the area of service. To reduce the effect of physical barriers, place the Router in a
location with the least physical obstructions in the service area.
Network
I use my laptop at work and at home. Is there something special I need to
do to make it work in both places?
Yes. You must reconfigure your network settings, including Workgroup, Domain,
Password, User name, IP addressing, and any other specific settings used by your
company. You may also use third-party software like NetSwitcher to automati-
cally switch between different configurations.
do to make it work in both places?
Yes. You must reconfigure your network settings, including Workgroup, Domain,
Password, User name, IP addressing, and any other specific settings used by your
company. You may also use third-party software like NetSwitcher to automati-
cally switch between different configurations.
What is the valid IP range I can use for my home network?
The valid
The valid
IP
range for the Router is 192.168.0.2 to 192.168.0.254 by default.
How do I find out which IP address my computer is using?
Windows 95, 98, 98SE, and Me - Select Start, Run, and type
Windows 95, 98, 98SE, and Me - Select Start, Run, and type
winipcfg
. Press
Enter. When the “Winipcfg” window appears, ensure your network device is
selected.
selected.