Cisco Systems 1130AG Benutzerhandbuch

Prior to beginning the actual access point deployment, perform these tasks:

Ensure that a site survey has been preformed.

Ensure that your network infrastructure devices are operational and properly configured.

For lightweight access points, perform these tasks:

Ensure that your controllers are connected to switch trunk ports.

Ensure that your switch is configured with untagged access ports for connecting your access 
points.

Ensure that a DHCP server with Option 43 configured is reachable by your access points.

To deploy your access points, follow these steps:

Obtain the access point location map created during your building site survey.

Review the access point locations and identify the specific mounting methods required for each access 
point location. 

For each access point perform these steps:

For lightweight access points, record the access point MAC address on the access point location 
map. When you have completed the access point deployment, return the access point MAC addresses 
and the access point locations on the access point location maps or floor plans to your network 
planner or manager. The network operators can use the MAC address and location information to 
create maps for precise wireless system management.

Attach your access point to the mounting plate (see the 

).

Mount the access point at the indicated destination using the specified mounting method. For 
specific mounting instructions, see these sections:

Horizontal surface, such as a ceiling (see the 

Below a suspended ceiling (see the 

Above a suspended ceiling (see the 

On a desktop or shelf (see the 

.

Optionally secure the access point using a padlock or security cable (see the 

).

Connect the access point cables (Ethernet, optional power, optional antennas). For instructions see 
the 

.

On power up, verify that the access point is associated to a controller and operating normally. For 
additional information, refer to the 

 or the 

.