D-Link PM0599-03 Benutzerhandbuch
COPYRIGHT © 2006 MERIT INDUSTRIES, INC.
The Router
Introduction
The D-Link Router supplied with your jukebox provides two functions. It is the connecting
point for the network in the location, and it distributes the Internet from the Modem to the
jukebox and other devices. The connections between the router and the jukebox and other
broadband equipment will be the same for all types of Internet technology.
point for the network in the location, and it distributes the Internet from the Modem to the
jukebox and other devices. The connections between the router and the jukebox and other
broadband equipment will be the same for all types of Internet technology.
FIGURE 2-2 - FRONT VIEW OF D-LINK ROUTER
1.
Power Light - A solid light indicates a proper connection to the power supply.
2.
WAN Light - A solid light indicates connection on the WAN (Wide Area Network) i.e. the
Modem. This LED blinks during periods of data transmission.
Modem. This LED blinks during periods of data transmission.
3.
Link/Act - Local Network port lights (LAN Ports 1-4). A solid light indicates connection
on to an Ethernet-enabled device (the jukebox). The LED flickers when the correspond-
ing port is sending or receiving data.
on to an Ethernet-enabled device (the jukebox). The LED flickers when the correspond-
ing port is sending or receiving data.
FIGURE 2-3 - REAR VIEW OF THE D-LINK ROUTER
1.
Local Area Network Ports (1-4) - These are LAN port sockets (CAT5 Ethernet RJ-45
Cable). The LED glows steady when a port is connected to equipment on the local
network.
Cable). The LED glows steady when a port is connected to equipment on the local
network.
2.
WAN Port - This is where you connect the broadband equipment, such as the Modem or
Satellite Receiver.
Satellite Receiver.
3.
Power Input - Connect the included power adapter’s output here.
4.
Hardware Reset - This button is used to restore the DI-604 to its factory default set-
tings.
tings.
19 MOD BOX INSTALLATION & OWNER’S MANUAL PM0599-03
1
2
3
1
2
3
4