D-Link PM0599-03 Benutzerhandbuch
COPYRIGHT © 2006 MERIT INDUSTRIES, INC.
INSTALLING THE HARD DRIVE
The following steps describe how to install a hard drive in the jukebox.
1.
Unlock the jukebox and open the front door. Unplug the line cord at the wall or at
the power supply as described above.
the power supply as described above.
2.
Deluxe model only: Remove the 4 screws securing the amplifier accessory
board and set the board aside. Then, remove the 4 screws securing the power
supply and router bracket and set the assembly aside.
board and set the board aside. Then, remove the 4 screws securing the power
supply and router bracket and set the assembly aside.
3.
Unplug the router power cable and Ethernet cable (see Figure 3.1). Then,
remove the 4 screws securing the router’s power switchbox. Be careful when
removing the switchbox as there are spacers underneath.
remove the 4 screws securing the router’s power switchbox. Be careful when
removing the switchbox as there are spacers underneath.
4.
Loosen the 4 screws securing the hard drive tray, slide it to the right, and remove
the tray (see Figure 3-2). Using the 4 screws taped to the tray or found in the
Handy Case, mount the hard drive as shown in Figure 3-3.
the tray (see Figure 3-2). Using the 4 screws taped to the tray or found in the
Handy Case, mount the hard drive as shown in Figure 3-3.
5.
Attach the power supply and IDE cable to the hard drive as shown in Figure
3-4. Make sure both headers are firmly seated.
3-4. Make sure both headers are firmly seated.
6.
Place the completed assembly back onto the 4 mounting screws, slide it to the left
and tighten the screws. Be sure the IDE cable doesn’t interfere with any other
motherboard components.
and tighten the screws. Be sure the IDE cable doesn’t interfere with any other
motherboard components.
7.
Replace the spacers under the router’s power switchbox, and resecure the
switchbox with the 4 screws removed in step 3. Reconnect the power supply
and router power cables along with the router’s Ethernet line(s).
switchbox with the 4 screws removed in step 3. Reconnect the power supply
and router power cables along with the router’s Ethernet line(s).
8.
Deluxe model only: Replace the 4 screws securing the power supply and
router bracket. Then, replace the 4 screws securing the amplifier accessory
board.
router bracket. Then, replace the 4 screws securing the amplifier accessory
board.
9.
Close the front door and plug in and turn on the jukebox.
CAUTION
Hard drives are extremely sensitive to physical mishandling.
Always keep the hard drives protected from accidental falls,
banging, dust, or liquids.
Always keep the hard drives protected from accidental falls,
banging, dust, or liquids.
WARNING
Never install or remove a hard drive when the unit is pow-
ered on. As an extra precaution, always unplug the power
cord at the power supply before removing or installing the
hard drive.
ered on. As an extra precaution, always unplug the power
cord at the power supply before removing or installing the
hard drive.
27 MOD BOX INSTALLATION & OWNER’S MANUAL PM0599-03
Section 3: Installing Hard Drive and Testing