D-Link PM0599-03 Benutzerhandbuch

COPYRIGHT © 2006 MERIT INDUSTRIES, INC.

Preventive maintenance should be performed at regular intervals.  At every visit, the exterior
should be cleaned and the touch screen should be re-calibrated.  Every 3-4 months, the interior
should be cleaned.

      Part                      Procedure

   Touch Screen          Clean with household glass cleaner and paper towel or clean cloth.
                                        CAUTION: DO NOT SPRAY CLEANER ON THE
                                        TOUCH SCREEN.  SPRAY CLEANER ON THE TOWEL,

                                       After cleaning the touch screen it may not respond to touch for a

                    few seconds.

  Cabinet and Lens      Cloth moistened in water with any mild cleaning product.

     Calibration              Please see the following procedure.

The following procedure describes how to calibrate the touch screen:

1.

Power on the MoD BoX jukebox and boot up the application.

2.

Open the front door of the jukebox.

3.

Locate the “Calibrate” button on the Communication Controller (see
Figure 3-6).
Press the button once to launch the calibration program.  This will override
the application while the program runs.  See the screen display below.

4.

Close the front door and make sure it locks.

5.

Follow the directions on the screen, touching the center of the targets,
then touching “YES”.

FIGURE 6-1 - CALIBRATION SCREEN

43                                                             MOD BOX INSTALLATION & OWNER’S MANUAL                                         PM0599-03