D-Link PM0599-03 Benutzerhandbuch

Seite von 68
COPYRIGHT © 2006 MERIT INDUSTRIES, INC.
UNPACKING INSTRUCTIONS
This section contains information for unpacking the jukebox and installing it at a location.
Save all tie-down hardware in case the MoD BoX must be moved to another location.
Exterior
1.
Remove the shipping carton with care: Do not use shipping hooks or sharp tools that
could damage the jukebox cabinet.
2.
Remove the plastic bag that covers the jukebox.
3.
Carefully inspect the interior and exterior of the jukebox to ensure that no damage
occurred during transit.
If damage is detected, the carrier who delivered the jukebox should be contacted
immediately to examine it.  Regardless of the exterior condition of the shipping car-
tons, the carrier should be called and notified of damage.  Do not destroy packing
material or boxes until the carrier’s agent has examined them.
Damage claims are your responsibility.  Do not return damaged merchandise until
after your claim has been established.  The invoice amount for repair charges can
then be collected from the carrier.
Doors
1.
Locate the red bag in the coin return on the side of the cabinet.  Remove the door key
from the bag and unlock the top door.  Turn the key to the right and press in on the
door as you turn the key.
VISUAL INSPECTION
Check to be sure that all electrical plugs are completely seated into their receptacles.
HANDY CASE
Locate the Handy Case, the blue plastic envelope.  The Handy Case contains a variety of
items, including manuals, spare parts, and fuses.  The monitor control module (to control
vertical/horizontal controls and brightness/contrast controls) is also in the case, and should
be plugged into the mating connector on the monitor should you need to adjust the monitor
settings.  Keep the Handy Case with the jukebox at all times for ready reference.
5                                                                 MOD BOX INSTALLATION & OWNER’S MANUAL                                         PM0599-03