Adtran Express XL Benutzerhandbuch
Chapter 3: Terminal Menu Operation and Structure
68
Express XL/XLT User Manual
61200070L1-1
Route/IP/Net
Write security: 3; Read security: 5
The PPP peer’s IP address or network can be set here, if known. Leaving this
at 0.0.0.0 means that the Express XL/XLT will determine the PPP peer’s IP and
network using the PPP IPCP.
The PPP peer’s IP address or network can be set here, if known. Leaving this
at 0.0.0.0 means that the Express XL/XLT will determine the PPP peer’s IP and
network using the PPP IPCP.
Route/Netmask
Write security: 3; Read security: 5
This network mask is applied to the IP/NET address for determining the PPP
peer’s network. If left as 0.0.0.0, a standard network mask is used.
This network mask is applied to the IP/NET address for determining the PPP
peer’s network. If left as 0.0.0.0, a standard network mask is used.
Route/Static Route
Write security: 3; Read security: 5
When set to Yes (def), the Express XL/XLT will add the network defined
above as an idle route in the IP routing table. When an IP packet is routed to
this idle route, the Express XL/XLT will dial using this profile. When set to
No
When set to Yes (def), the Express XL/XLT will add the network defined
above as an idle route in the IP routing table. When an IP packet is routed to
this idle route, the Express XL/XLT will dial using this profile. When set to
No
, an idle route is not placed in the table. This is necessary for dial-on-de-
mand applications and if the probe feature is not used.
Route/Private
Write security: 3; Read security: 5
When set to Yes, the Express XL/XLT will not advertise this static route entry.
A setting of No (def) means any static route added for this profile is advertised
using RIP.
When set to Yes, the Express XL/XLT will not advertise this static route entry.
A setting of No (def) means any static route added for this profile is advertised
using RIP.
Route/Hops
Write security: 3; Read security: 5
This value is the metric or number of hops that RIP will use in advertising the
static route. The range is 1 to 16 where 1 is the default. The value 16 is consid-
ered an infinite distance in RIP and is, in effect, poisoning the route.
This value is the metric or number of hops that RIP will use in advertising the
static route. The range is 1 to 16 where 1 is the default. The value 16 is consid-
ered an infinite distance in RIP and is, in effect, poisoning the route.
Route/Force IP
Write security: 3; Read security: 5
When set to Yes, the Express XL/XLT will force the PPP peer to use the IP ad-
dress in the IP/Net for this profile as its WAN IP address. Normally this is set
in the No (def) position.
When set to Yes, the Express XL/XLT will force the PPP peer to use the IP ad-
dress in the IP/Net for this profile as its WAN IP address. Normally this is set
in the No (def) position.