Lucent Technologies Cajun M770 Benutzerhandbuch
Chapter 6
Port Mirroring
Cajun M770 Manager User’s Guide
29
Enabling Port Mirroring
To enable port mirroring, you must define a source and destination port.
Note: Only a single pair of ports can be defined for port mirroring on each
DomainX.
DomainX.
To enable Port Mirroring for the DomainX:
1
1
In the Port Mirroring dialog box, open the Port Monitoring drop-down list (refer
to Figure 6.1) and select Enable.
to Figure 6.1) and select Enable.
2
Define source and destination ports in one of the following ways:
a
a
From the Module drop-down list, select a module number and a port
number.
number.
OR
a
In the Chassis View click on the port you want to set.
b
In the Port Mirroring dialog box, click Select from Zoom. The port and
module numbers appear in the Port Mirroring dialog box (refer to Figure
6.1).
module numbers appear in the Port Mirroring dialog box (refer to Figure
6.1).
3
Click OK.
The manager sets the source and the destination ports for copying packets, enabling
Port Mirroring.
Port Mirroring.
Disabling Port Mirroring
To disable Port Mirroring:
1
In the Port Mirroring dialog box, open the Port Monitoring drop-down list (refer
to Figure 6.1) and select Disable.
to Figure 6.1) and select Disable.
2
Click OK.
Received and transmitted packets are not copied from one port to another.
To close the Port Mirroring dialog box, click Cancel.