Lancom Systems 7111 VPN Benutzerhandbuch
LANCOM 7111 VPN – LANCOM 8011 VPN
Chapter 2: Installation
20
EN
Flashing means, that the LED lights up very briefly in the respective col-
our and stay then clearly longer (approximately 10x longer) switched off.
our and stay then clearly longer (approximately 10x longer) switched off.
Inverse flashing means the opposite. The LED lights permanently in the
respective colour and is only briefly interrupted.
respective colour and is only briefly interrupted.
Flickering means, that the LED is switched on and off in irregular inter-
vals.
vals.
Power
This LED indicates that the device is operational. After the device has been
switched on, it will flash green for the duration of the self-test. After the self-
test, either an error is output by a flashing red light code or the device starts
and the LED remains lit green.
switched on, it will flash green for the duration of the self-test. After the self-
test, either an error is output by a flashing red light code or the device starts
and the LED remains lit green.
The power LED flashes red/green in alternation until a configuration
password has been specified. Without a configuration password, the
configuration data of the LANCOM is insecure. Under normal circum-
stances, you would assign a configuration password during the basic
configuration (see instructions in the following chapter). For informa-
tion about a later assignment of the configuration password see the
section ’Security settings’
password has been specified. Without a configuration password, the
configuration data of the LANCOM is insecure. Under normal circum-
stances, you would assign a configuration password during the basic
configuration (see instructions in the following chapter). For informa-
tion about a later assignment of the configuration password see the
section ’Security settings’
Online
The Online LED indicates the overall status of all WAN ports:
off
Device off
green
blinking
Self-test when powering up
green
constantly on
Device ready for use
red/
green
green
blinking alternately
Device insecure: configuration password not assigned
red
blinking
Time or connect-charge reached
off
No active connection
green
flashing
Establishing first connection
green
inverse flashing
Establishing further connection
green
constantly on
At least one connection established
red
constantly on
Error establishing the previous connection