Lancom Systems 3550 Benutzerhandbuch

LANCOM 3550 Wireless

20

circumstances, you would assign a configuration password during the
basic configuration (see instructions in the following chapter).

Wireless Link

Gives information about the Wireless LAN access of the internal wireless net-
work adapter of the base station. The condition of the optional second exter-
nal wireless network card is not indicated on this display.

The wireless link display can assume four different conditions:

There's no need to worry if the Power-LED blinks red and you can no
longer connect to the WAN.This simply indicates that a preset time or
connect-charge limit has been reached.

There are three methods available for unlocking:

Reset connect charge protection.

Increase the limit that has been reached.

Completely deactivate the lock that has been triggered (set limit
to '0').

If a time or connect charge limit has been reached, you will be notified in LANmonitor. To
reset the connect charge protection, select Reset Charge and Time Limits in the context
menu (right mouse click). You can configure the connect charge settings in LANconfig under
Management 

 Costs (you will only be able to access this configuration if 'Complete con-

figuration display' is selected under Extras 

 Options…).

You will find the connect charge protection reset in WEBconfig and all parameters under
Expert Configuration 

 Setup 

 Charges- module

Signal for reached time 

or connect-charge 

limit

PowerPower

off

no Wireless LAN adapter found

green

Wireless LAN adapter ready for use

green

blinking

activity in the Wireless LAN (blink frequency indicates 
the number of registered stations)

red

flashing

error in Wireless LAN (e.g. sending error because of bad 
connection)