Paradyne 9820-8M Benutzerhandbuch

SNMP MIBs and Traps, and RMON Alarm Defaults

9820-A2-GB20-20

June 2000

These traps indicate that an enterprise-specific event has occurred. Supported
enterprise-specific traps are listed below.

enterpriseCIR-
Change(15)

H

devFrExtDlciIfIndex
(devFrExt.mib)

H

devFrExtDlciDlci
(devFrExt.mib)

H

devFrExtDlciCIR
(devFrExt.mib)

H

devLastTrapString
(devHealthAndStatus.-

mib)

CIR has changed due to the LMI
report. LMI Protocol is set to
Standard and the network’s CIR
changed.

String: 
‘CIR on $ifString changed to
$CIR bps.’

enterpriseConfig-
Change(6)

H

devLastTrapString
(devHealthAndStatus.-
mib)

Configuration has been changed
via the menu-driven user
interface, an SNMP Manager,
or auto-configuration after 60
seconds has elapsed without
another change.

String: 
‘Device configuration change.’

enterpriseDLCI-
delete(17)

H

devFrExtDlciIfIndex
(devFrExt.mib)

H

devFrExtDlciDlci
(devFrExt.mib)

H

devLastTrapString
(devHealthAndStatus.-

The DLCI has been deleted. The
network no longer supports the
DLCI, and it was removed.

Strings: 
‘$ifString deleted by Auto-DLCI
delete.’

enterpriseDLCI-
Down(11)

(devHealthAndStatus.-
mib.)

DLCI Status is set to Inactive; the
DLCI is down.

Strings: 
‘$ifString down.’ (Due to LMI or
physical failure.)

‘$ifString administratively
shutdown.’ (Due to an intentional
shutdown.)

enterpriseDLCIUp(12)

DLCI Status is set to Active;
DLCI is up again.

String: 
‘$ifString up.’

enterpriseLinkSpeed-
Change(14)

H

ifIndex (RFC 1573)

H

ifSpeed (RFC 1573)

H

devLastTrapString
(devHealthAndStatus.-
mib

Speed has changed as a result
the Autorate algorithm.

String: 
‘Speed of $ifName changed to
$ifSpeed bps.’