Paradyne 9820-8M Benutzerhandbuch

Configuration Procedures

9820-A2-GB20-20

June 2000

When changes to the configuration options are complete, use the Save function
key to save your changes to either the Current, Customer 1, or Customer 2
configuration areas.

When changing settings, you must Save for changes to take effect.

"

To save the configuration option changes:

1. Press Ctrl-a to switch to the function key area at the bottom of the screen.

2. Type s or S to select the Save function and press Enter.

The Save Configuration To: screen appears.

If you try to exit the Configuration menu without saving changes, a Save
Configuration screen appears requiring a Yes or No response.

— If you select No, the Main Menu screen reappears and the changes

are not saved.

— If you select Yes, the Save Configuration To: screen appears.

3. Select the configuration option area to which you want to save your changes

(usually the Current Configuration) and press Enter.

When Save is complete, 

 appears in the message area

at the bottom of the screen.

There are other methods of changing configurations, like SNMP and
Auto-Configuration. Since multiple sessions can be active at the same
time, the last change made overwrites any previous or current changes
being made. For instance:

— Saving your configuration changes would cause configuration

changes made via another method to be lost.

— If you are making changes and someone else makes changes and

saves them, your changes would be lost.

At a minimum, the following configuration options must be set before deploying a
a FrameSaver unit to a remote site:

H

Node IP Address

H

Node Subnet Mask