Paradyne 9820-8M Benutzerhandbuch

Configuration Options

9820-A2-GB20-20

June 2000

FrameSaver units are already set up for SNMP management, with Community
Name 1 set to Public and Name 1 Access set to Read/Write. For remote sites,
other than the IP Address, this is all that is required.

Configuration

→

Management and Communication

→

General SNMP Management

See Table 4-12, 

information. For the central site, local management between the unit and the
router must be set up, as well (see 

Setting Up Local Management at the Central

Site).

Set up a local management PVC between the central site unit and its router for
local management control by the end-user customer.

"

To set up management through the router:

1. Create a DLCI that will be used for management on the user data port.

Configuration

→

Data Ports

→

DLCI Records

2. Create a Management PVC using the user data port DLCI just created.

Configuration

→

Management and Communication

→

Management PVC

Minimally, enter the following options:

— Name for the management PVC

— Interface IP Address and Subnet Mask, if different from the Node’s

— Primary Link for this Management PVC (the user data port)

— Primary DLCI (i.e., the data port DLCI)

3. Save the configuration.

See Table 4-8, 

for configuration information.