Pelco C4625M Benutzerhandbuch
4
C4625M (9/09)
About this Guide
This guide provides instructions on operating the UDI5000-CAM configuration application. With this application you can perform the following
tasks:
tasks:
•
Associate up to 16 standard resolution or megapixel third-party IP cameras.
•
Track system resource usage and capacity.
•
Review and configure network settings.
•
Configure device security settings.
The application is accessible over the Internet from a computer with Microsoft
®
Internet Explorer
®
7.0 or later, Mozilla
®
Firefox
®
3.5 or later.
After you have associated cameras with the UDI5000-CAM, you can view live and recorded video from any viewing station on the Endura
®
system. Refer to the operation manual for the viewing station for instructions.
Accessing the Configuration Application
There are two ways to access the configuration application: (1) directly from a Web browser, or (2) from the Devices setup screen of the
WS5000 advanced system management software.
WS5000 advanced system management software.
LOGGING ON TO THE APPLICATION FROM A WEB BROWSER
1. Open a Web browser and type the IP address for the UDI5000-CAM in the Address field
2. Press Enter. The Login screen appears.
Figure 1. UDI5000-CAM Login Screen
3. Enter the password and click Login. By default, admin is the password. The UDI5000-CAM configuration application main page appears.
NOTE: Some third-party cameras require a separate password to display their configuration settings. If such a camera is already
associated with the UDI5000-CAM, a separate logon screen appears. You must enter the specific user ID and password for the camera
before you can configure it from the UDI5000-CAM configuration application. Refer to the camera manufacturer’s documentation to locate
the correct user ID and password. If necessary, contact a system administrator for this information.
associated with the UDI5000-CAM, a separate logon screen appears. You must enter the specific user ID and password for the camera
before you can configure it from the UDI5000-CAM configuration application. Refer to the camera manufacturer’s documentation to locate
the correct user ID and password. If necessary, contact a system administrator for this information.
LOGGING ON TO THE APPLICATION FROM THE WS5000 SOFTWARE
1. Start the WS5000 advanced system management software, and then open the Setup screen.
2. On the Devices tab, select the UDI5000-CAM from the cameras list. If necessary, filter the list to display only universal devices.
3. Click the Configure button. The Login screen appears in a Web browser window.
4. Enter the password and click Login. By default, admin is the password. The UDI5000-CAM configuration application main page appears.
EXITING THE APPLICATION
There are two ways to exit, or close, the application main page.
•
Click the Exit button
to close the application main page and return to the Login screen.
•
Click the Close button
in the upper-right corner of the Web browser window.