SonicWALL Internet Security Appliances Benutzerhandbuch
Managing Your SonicWALL Internet Security Appliance Page 75
CLI Support and Remote Management
Out-of-band management is available on SonicWALL Internet Security Appliances using the CLI
(Command Line Interface) feature. SonicWALL Internet Security Appliances can be managed from a
console using typed commands and a modem or null-modem cable that is connected to the serial
port located on the back of the SonicWALL appliance. The only modem currently supported is the US
Robotics v.90/v.92 modem. CLI communication requires the following modem settings:
•
(Command Line Interface) feature. SonicWALL Internet Security Appliances can be managed from a
console using typed commands and a modem or null-modem cable that is connected to the serial
port located on the back of the SonicWALL appliance. The only modem currently supported is the US
Robotics v.90/v.92 modem. CLI communication requires the following modem settings:
•
9600 bps
•
8 bits
•
no parity
•
no hand-shaking
After the modem is accessed, a terminal emulator window such as a hyper terminal window is used
to manage the SonicWALL Internet Security Appliance. Once the SonicWALL is accessed, type in the
User Name and password: admin for User Name and then the password used for the management
interface.
The following CLI commands are available for the SonicWALL:
•
to manage the SonicWALL Internet Security Appliance. Once the SonicWALL is accessed, type in the
User Name and password: admin for User Name and then the password used for the management
interface.
The following CLI commands are available for the SonicWALL:
•
? or Help - displays a listing of the top level commands available.
•
Export - exports preferences from the SonicWALL using Z-modem file transfer protocol.
•
Import - imports preferences from the SonicWALL using Z-modem file transfer protocol.
•
Logout - logout of the SonicWALL appliance.
•
Ping - pings either an IP address or domain name for a specified host.
•
Restart - restart the SonicWALL
•
Restore - restores the factory default settings for all saved parameters with the exception of the
password, the LAN IP address, and the subnet mask.
password, the LAN IP address, and the subnet mask.
•
Status - displays the information typically seen on the Web management interface tab labeled
General.
General.
•
TSR - retrieves a copy of the tech support report using Z-modem file transfer protocol.