Sony PFV-L10 Benutzerhandbuch
6 (E)
5
Cover plates
Remove the corresponding plates to install the optional
boards.
boards.
6 U
(signal ground) terminal
For signal ground. Connect to a ground wire as
required.
required.
7
STATUS OUT connector (15-pin)
Outputs the following error statuses of the PFV-L10.
• The inserted optional board does not function
• The inserted optional board does not function
correctly.
• The temperature inside the unit has risen to a
specified level.
• Trouble occurs with the output voltage of power unit
A or B.
• The power is turned off.
• The ventilation fans have stopped rotating.
• A voltage overload has occurred.
• The ventilation fans have stopped rotating.
• A voltage overload has occurred.
Pin No.
Functions
1
Status output of the board inserted in slot 1.
Normal: Low level
Normal: Low level
2
Status output of the board inserted in slot 2.
Normal: Low level
Normal: Low level
3
Status output of the board inserted in slot 3.
Normal: Low level
Normal: Low level
4
Status output of the board inserted in slot 4.
Normal: Low level
Normal: Low level
5
Status output of the board inserted in slot 5.
Normal: Low level
Normal: Low level
6
Status output of the board inserted in slot 6.
Normal: Low level
Normal: Low level
7
Status output of the board inserted in slot 7.
Normal: Low level
Normal: Low level
8
Status output of the board inserted in slot 8.
Normal: Low level
Normal: Low level
9
Status output of the board inserted in slot 9
Normal: Low level
Normal: Low level
10
Status output of the power unit B.
Normal: Low level
Normal: Low level
11
Status output of the power unit A.
Normal: Low level
Normal: Low level
12
Status output of the ventilation fans.
Normal: Low level
Normal: Low level
13
Status output of the voltage load.
Normal: Low level
Normal: Low level
14
Status output of board inserted in slot 10
Normal: Low level
Normal: Low level
15
GND
8
~AC IN A connector
To supply power to power unit A, connect to an AC
power supply using an appropriate AC power cord.
power supply using an appropriate AC power cord.
9
~AC IN B connector
To supply power to power unit B, connect to an AC
power supply using an appropriate AC power cord.
power supply using an appropriate AC power cord.
Locations and Functions of Parts