SonicWALL EM5000 Benutzerhandbuch
Page 52
Configuring a SonicWALL NSA 2400 for Management
•
If the SonicWALL appliance will be managed through
an existing tunnel or is on the same network as the
SonicWALL UMA EM5000 appliance, select Existing
Tunnel. Verify that a tunnel has been created between
the SonicWALL UMA EM5000 subnet and the
appliance.
an existing tunnel or is on the same network as the
SonicWALL UMA EM5000 appliance, select Existing
Tunnel. Verify that a tunnel has been created between
the SonicWALL UMA EM5000 subnet and the
appliance.
•
If the SonicWALL appliance will be managed using
HTTPS, select HTTPS. If the SonicWALL UMA
EM5000 appliance role includes the GMS Reporting
service, do not select the Send Syslog Messages to
a Distributed GMS Reporting Server checkbox. If
you have a distributed SonicWALL GMS deployment
with a different Reporting server, select the Send
Syslog Messages to a Distributed GMS Reporting
Server checkbox and type the IP address and port of
the Reporting server into the respective fields.
HTTPS, select HTTPS. If the SonicWALL UMA
EM5000 appliance role includes the GMS Reporting
service, do not select the Send Syslog Messages to
a Distributed GMS Reporting Server checkbox. If
you have a distributed SonicWALL GMS deployment
with a different Reporting server, select the Send
Syslog Messages to a Distributed GMS Reporting
Server checkbox and type the IP address and port of
the Reporting server into the respective fields.
Note:
If HTTPS management mode is specified, ensure that
the SonicWALL UMA EM5000 can receive syslog data
from the managed appliance by allowing traffic over
port 514, or a custom port if you specified one, to pass
through the firewall in front of the SonicWALL UMA
EM5000.
from the managed appliance by allowing traffic over
port 514, or a custom port if you specified one, to pass
through the firewall in front of the SonicWALL UMA
EM5000.
8.
When you are finished, click OK.