SonicWALL EM5000 Benutzerhandbuch
SonicWALL UMA EM5000 Getting Started Guide
Page 75
About the Status Menu
The Status menu allows you to view specific aspects of the
appliance. The LCD cycles through the Status list by default
when no other menu is in use. You can also navigate the list
using the Up and Down buttons. Status values in the list include
the following:
appliance. The LCD cycles through the Status list by default
when no other menu is in use. You can also navigate the list
using the Up and Down buttons. Status values in the list include
the following:
•
Appliance name
•
Software version
•
Date
•
Time
•
Uptime
•
Management URL
•
Interface eth0 IP (default LAN)
•
Interface eth0 subnet mask
Using the Configure Menu
The Configure menu allows you to configure specific aspects of
the appliance. When the Configure menu is selected, the LCD
will display a PIN request.
the appliance. When the Configure menu is selected, the LCD
will display a PIN request.
Note:
The Default PIN is 76642. This number spells SONIC
on a phone keypad.
All numbers are entered using the 4 buttons on the D-pad.
To enter the PIN, use the buttons as follows:
1.
Select the desired number using the Up and Down
buttons. Digits increase incrementally from 0 to 9.
buttons. Digits increase incrementally from 0 to 9.
2.
To move to the next digit field, press the Right button.
3.
To move back to a previous digit field, press the Left
button.
button.
4.
When you are finished entering the PIN, press the Right
button to confirm your PIN and enter the Configure Menu.
button to confirm your PIN and enter the Configure Menu.
The appliance allows the user to navigate in and out of the
Configure menu without having to re-enter the PIN. However,
once the appliance enters screen-saver mode, whether from
the 6 second time out or from pressing the Left button while in
the Main Menu, the PIN number must be re-entered to access
the Configure menu.
Configure menu without having to re-enter the PIN. However,
once the appliance enters screen-saver mode, whether from
the 6 second time out or from pressing the Left button while in
the Main Menu, the PIN number must be re-entered to access
the Configure menu.
After entering a new value for a setting in the Configure menu,
you are asked if you want to commit changes. Using the 4-way
D-pad, press the Right button for yes or the Left button for no.
you are asked if you want to commit changes. Using the 4-way
D-pad, press the Right button for yes or the Left button for no.
If you choose yes, the screen notifies you that the settings are
updated.
updated.