Sony HDS-X5800 Benutzerhandbuch
1-9 (E)
HDS-X5800
Removal
1.
1.
Open the eject levers of the board in the direction of
arrow B.
arrow B.
2.
Remove the board from the HDS-X5800.
n
Remove the board while applying equal force to the eject
levers at both ends of the board.
Remove the board while applying equal force to the eject
levers at both ends of the board.
HKS-5811M/5811SD (EQ Board)
The HKS-5811M/5811SD consists of the two types of the
boards : EQ board (EQ-91 board/EQ-92 board) and CI-29
boards.
Installation and removal of the EQ board are described below.
For the CI-29 board, refer to Section 1-6-4.
boards : EQ board (EQ-91 board/EQ-92 board) and CI-29
boards.
Installation and removal of the EQ board are described below.
For the CI-29 board, refer to Section 1-6-4.
n
When the EQ board is going to be installed in the existing
MX board (MX-103/MX-104 board), remove the MX board
from the slot beforehand. (Refer to this section “HKS-
5820M/5830M/5830SD”.)
When the EQ board is going to be installed in the existing
MX board (MX-103/MX-104 board), remove the MX board
from the slot beforehand. (Refer to this section “HKS-
5820M/5830M/5830SD”.)
Installation
1.
1.
Remove the eight screws and remove the board
bracket (MX).
n
Keep the removed board bracket (MX).
bracket (MX).
n
Keep the removed board bracket (MX).
Board bracket (MX)
Shield plate (MX)
(In the case of the HKS-5811SD)
MX-104 board
PSW3
x 6
PSW3
x 6
PSW3
x 6
2.
Install the desired board into the corresponding shield
plate.
m
. When inserting the EQ board, be careful that the
plate.
m
. When inserting the EQ board, be careful that the
side-B (soldering side) of the EQ board must not
touch the shield plate.
touch the shield plate.
. Check that the EQ board is securely connected.
Model name
Board name
Installation slot
HKS-5811M
EQ-91
Shield plate of the MX-103 board
HKS-5811SD EQ-92
Shield plate of the MX-104 board
3.
Secure the EQ board with the eight screws removed in
step 1.
step 1.
4.
Install the MX board.
(Refer to this section “HKS-5820M/5830M/5830SD ”.)
(Refer to this section “HKS-5820M/5830M/5830SD ”.)
Removal
Remove it by reversing the installation procedure.
Remove it by reversing the installation procedure.
EQ-92 board
MX-104 board
(In the case of the HKS-5811SD)
Connectors
PSW3
x 6
PSW3
x 6
PSW3
x 6
1-6. Installation of Optional Boards