Sony BVS-A3232 Benutzerhandbuch
5-50
ROUTING SWITCHER SYSTEM (E)
5-4. Setting Items of the Secondary Station on Monitor S-BUS (BKDS-V3293B only)
MONITOR SYSTEM SETUP MENU BKS-R1607 V1.00 STATION NUMBER 3
SET PANEL TABLE(SOURCE) CONTROL DESTINATION = OUT001
01 KEY=IN001 02 KEY=IN002 03 KEY=IN003 04 KEY=IN004
05 KEY=IN005 06 KEY=IN006 07 KEY=IN007 08 KEY=IN008
09 KEY=....... 10 KEY=....... 11 KEY=....... 12 KEY=.......
13 KEY=....... 14 KEY=....... 15 KEY=....... 16 KEY=.......
17 KEY=IN009 18 KEY=IN010 19 KEY=IN011 20 KEY=IN012
21 KEY=IN013 22 KEY=IN014 23 KEY=IN015 24 KEY=IN016
25 KEY=....... 26 KEY=....... 27 KEY=....... 28 KEY=.......
29 KEY=....... 30 KEY=....... 31 KEY=....... 32 KEY=.......
SET PANEL TABLE(DESTINATION)
01 KEY=....... 02 KEY=....... 03 KEY=....... 04 KEY=.......
05 KEY=....... 06 KEY=....... 07 KEY=....... 08 KEY=.......
09 KEY=OUT001 10 KEY=OUT002 11 KEY=OUT003 12 KEY=OUT004
13 KEY=OUT005 14 KEY=OUT006 15 KEY=OUT007 16 KEY=OUT008
17 KEY=....... 18 KEY=....... 19 KEY=....... 20 KEY=.......
21 KEY=....... 22 KEY=....... 23 KEY=....... 24 KEY=.......
25 KEY=OUT009 26 KEY=OUT010 27 KEY=OUT011 28 KEY=OUT012
29 KEY=OUT013 30 KEY=OUT014 31 KEY=OUT015 32 KEY=OUT016
0=IN 1=OUT 2=.... 3=.... 4=.... 5=.... 6=.... 7=....
8=.... 9=.... A=.... B=.... C=.... D=.... E=.... F=....
Ctrl-E:MENU Ctrl-D:RETURN Ctrl-N:Type + Num
N : SET PANEL TABLE (BKS-R1607/R1608/R3204/R3205/R3209/R3210) <MONITOR MENU>
Purpose
This menu is used to assign source/destination name to
each source/destination selection button.
each source/destination selection button.
In the monitor mode, the button color of the remote control
unit will be green for both source and destination.
unit will be green for both source and destination.
Setting Procedure
1.
Select menu item [N].
2.
Select a button number using the cursor.
3.
When [Enter] is pressed, the name can be typed.
To delete the registration, press [Enter] before
To delete the registration, press [Enter] before
inputting the name.
4.
a)
When [J : NAME STYLE (Type
+ Num)] is
selected in the primary station menu, input the
type name (between 0 and F) and the number for
type name (between 0 and F) and the number for
the source and destination.
b) Each time [Ctrl]
_ [N] is pressed when [J :
NAME STYLE (DESCRIP. NAME)] is selected
in the primary station menu, the following input
in the primary station menu, the following input
modes will be switched alternately.
Description name input mode :
When “Ctrl N: Type
+ Num” is displayed on the
screen, it means that the name mode will be changed
to “Type + Number” by pressing [Ctrl]
to “Type + Number” by pressing [Ctrl]
_ [N].
Inputs the Description name from the first to seventh
characters with alphabet and numerical keys.
characters with alphabet and numerical keys.
“Type
+ Number” name input mode :
Same as a)
n
If the Description name has been set for the input/output
number the display of Description has priority to the
If the Description name has been set for the input/output
number the display of Description has priority to the
display of “Type
+ Number” even if the “Type + Number”
name is input.
5.
When [Enter] is pressed, the source name is set.
6.
When [Ctrl]
_ [E] is pressed, the screen will return to
the menu screen of the secondary station on the
monitor S-BUS.
When [Ctrl]
When [Ctrl]
_ [Z] is pressed, the screen will return to
the menu screen of the primary station on the monitor
S-BUS.
S-BUS.
When [Ctrl]
_ [D] is pressed, the screen will return to
the menu screen of the primary station on the standard
S-BUS.
Example of Setting Screen
m
1.
1.
Set the table data of BKS-R3204/R3205/R3206 by
eight buttons previously in the menu item [Z : SET
____ PANEL STATUS]. If “KEY = ____” is
displayed on the key number position, the name can
not be input.
____ PANEL STATUS]. If “KEY = ____” is
displayed on the key number position, the name can
not be input.
2.
Be sure to set either source or destination on the
respective buttons (keys) when setting the BKS-
respective buttons (keys) when setting the BKS-
R1607/R1608/R3209/R3210.
If both source and destination are set to the same
If both source and destination are set to the same
button (key), it will cause malfunction.
3.
When setting description names to the source/destina-
tion buttons, select a name from the description name
group sent to the remote control unit.
group sent to the remote control unit.
If other names are input, these will not be set even if
the [Enter] button is pressed.
the [Enter] button is pressed.
In such cases, transfer the group including the desired
description name from the primary station.
description name from the primary station.