SonicWALL 4000 Benutzerhandbuch
SonicWALL SSL VPN 4000 Getting Started Guide Page 41
Scenario B: Allowing WAN -> DMZ Connection in SonicOS Enhanced
Follow this procedure if you are connecting your SonicWALL SSL VPN 4000 to a
SonicWALL UTM appliance running SonicOS Enhanced. If your SonicWALL UTM
appliance is running SonicOS Standard, refer to “Scenario A: Allowing WAN -> DMZ
Connection in SonicOS Standard” on page 22.
SonicWALL UTM appliance running SonicOS Enhanced. If your SonicWALL UTM
appliance is running SonicOS Standard, refer to “Scenario A: Allowing WAN -> DMZ
Connection in SonicOS Standard” on page 22.
Create a public server access rule for HTTP and HTTPS traffic:
Note:
If you are already forwarding HTTP or HTTPS to an internal server, and you only
have a single public IP address, you will need to select different (unique) ports of
operation for either the existing servers or for the SonicWALL SSL VPN appliance,
because both cannot concurrently use the same IP address and port combinations.
operation for either the existing servers or for the SonicWALL SSL VPN appliance,
because both cannot concurrently use the same IP address and port combinations.
1.
Select the Firewall > Access Rules page.
2.
Click .
3.
In the Welcome to the SonicWALL Public Server Wizard page, click Next.
4.
In the Step 1: Public Server Type page, select:.
The Add Service Group dialog box should display.
Server Type
Other
Services
Create new group