Sony SS2624 Benutzerhandbuch
DSL/Cable Router User Guide
42
Wireless Station Configuration
This section applies to all Wireless stations wishing to use the DSL/Cable Router's Access
Point, regardless of the operating system which is used on the client.
Point, regardless of the operating system which is used on the client.
To use the Wireless Access Point in the DSL/Cable Router, each Wireless Station must have
compatible settings, as follows:
compatible settings, as follows:
Mode
The mode must be set to Infrastructure.
SSID (ESSID)
This must match the value used on the DSL/Cable Router. The default
value is
value is
SpeedStream
Note! The SSID is case sensitive.
WEP
By default, WEP on the DSL/Cable Router is disabled.
•
If WEP remains disabled on the DSL/Cable Router, all stations must
have WEP disabled.
•
If WEP is enabled on the DSL/Cable Router, each station must use
the same settings as the DSL/Cable Router.