Enterasys Networks 9033900-04 Benutzerhandbuch
Command Groups
A-118
dns
This command specifies the address for the primary or secondary domain name server to be used
for name‐to‐address resolution.
for name‐to‐address resolution.
Syntax
dns primary-server <server-address>
dns secondary-server <server-address>
• primary‐server is the primary server used for name resolution
• secondary‐server is the secondary server used for name resolution
• server‐address is the IP address of domain‐name server
Default Setting
None
Command Mode
Global Configuration
Command Usage
The primary and secondary name servers are queried in sequence.
Example
This example specifies two domain‐name servers.
Related Commands
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface ethernet
Enter Ethernet configuration commands, one per line.
RoamAbout 3000(if-ethernet)#dns primary-server 192.168.1.55
RoamAbout 3000(if-ethernet)#dns secondary-server 10.1.0.55
RoamAbout 3000(if-ethernet)#