Epson 80211b Benutzerhandbuch
40
Problems and Solutions
Here are some troubleshooting tips if you are having trouble setting up your
print server or printing over your wireless network.
print server or printing over your wireless network.
When you start WP-Admin, you see a message that Javaw.exe was not
found.
found.
You must have the Java Runtime Environment installed on your computer to
run WP-Admin. Uninstall the print server software, as described on page 46,
then reinstall it as described in the instructions starting on page 14.
run WP-Admin. Uninstall the print server software, as described on page 46,
then reinstall it as described in the instructions starting on page 14.
You’re having trouble connecting to the print server.
■
Check the lights on your print server. The yellow light remains on when
your network has a connection to the print server, and the green light
flashes when data is transmitted to the print server. If the yellow light is
on, make sure you have a connection between your computer and access
point or base station (if you have one).
your network has a connection to the print server, and the green light
flashes when data is transmitted to the print server. If the yellow light is
on, make sure you have a connection between your computer and access
point or base station (if you have one).
■
Make sure your computer’s wireless adapter is installed and configured
correctly. See the instructions that came with the adapter.
correctly. See the instructions that came with the adapter.
■
If you have an access point, make sure it is turned on and configured
correctly. You need to confirm the connection between your computer
and access point before you can connect to the print server. Try resetting
the access point if you’re having a problem establishing a connection. See
the instructions that came with your access point for more information.
correctly. You need to confirm the connection between your computer
and access point before you can connect to the print server. Try resetting
the access point if you’re having a problem establishing a connection. See
the instructions that came with your access point for more information.
■
If you’re using AirPort, make sure that AirPort is enabled in the
AppleTalk Control Panel. Also, make sure that AppleTalk and TCP/IP
are enabled in your AirPort utility. Finally, make sure that you are using
AirPort version 1.3 or later. (If you have an earlier version of AirPort, you
can download an upgrade to version 1.3 from Apple’s web site.)
AppleTalk Control Panel. Also, make sure that AppleTalk and TCP/IP
are enabled in your AirPort utility. Finally, make sure that you are using
AirPort version 1.3 or later. (If you have an earlier version of AirPort, you
can download an upgrade to version 1.3 from Apple’s web site.)
■
If you’re using an AirPort Base Station, make sure you have selected a
working connection to your base station from the AirPort Networks list.
If you’re using AirPort in computer-to-computer (ad hoc) mode, create or
join a computer-to-computer network.
working connection to your base station from the AirPort Networks list.
If you’re using AirPort in computer-to-computer (ad hoc) mode, create or
join a computer-to-computer network.
ZLUHOHVVVHUYHUERRN3DJH)ULGD\0D\30