Sony ECM-3711 Benutzerhandbuch

ECM-3711 Series User’s Manual 

 

71

 

This setting defines the number of minutes before the system enters "suspend mode", the 
deepest level of system inactivity shutdown. The exact definition depends on the system, 
but in general this mode means that all system devices are shutdown (except for any that 
the BIOS is specifically told to keep running) and the processor is shut down to a trickle 
mode.

. 

The choices: Disabled, 1, 2, 4, 6, 8, 10, 20, 30, 40 Min, 1 Hour. 

This determines the manner in which the monitor is always on or turned off during suspend 
mode. 
The choices: Always On, Suspend -> Off. 

This item allows you to select the video off method.   
The choices: Blank Screen, V/H SYNC+Blank, DPMS Support 

This determines the IRQ in which the MODEM can use

. 

The choices: NA, 3, 4, 5, 7, 9, 10, 11. 

Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off 
state when the system has “hung”.(Only could working on ATX Power supply) 
The choices: Delay 4 Sec, Instant-Off. 

3.5.5.10  Run VGABIOS if S3 Resume 
This item is to set whether to run VGABIOS if S3 resume.   
The choices: Auto, Yes, No 

3.5.5.11  Ac Loss Auto Restart: 
This item is to set whether to run Ac Loss Auto Restart. 
The choices: Off, On, Former-Sts.