Dynalink RTA1046VW Benutzerhandbuch
Wireless IAD User Manual
156
8. The
Enable network access
control using IEEE 802.1X is
selected by default, and
Protected EAP (PEAP) is
selected from the EAP type.
selected by default, and
Protected EAP (PEAP) is
selected from the EAP type.
9. Click
Properties under EAP
type.
10. Choose
Use a certificate on
this computer option and select
Use simple certificate
selection (Recommended).
Use simple certificate
selection (Recommended).
11. Check
the
Validate server
certificate check box if server
certificate validation is required
certificate validation is required
12. In
the
Trusted Root
Certification Authorities field,
check the check box beside the
name of the certificate authority
from which the server certificate
was downloaded. (e.g.,
askey.savd.tw)
check the check box beside the
name of the certificate authority
from which the server certificate
was downloaded. (e.g.,
askey.savd.tw)
Note that if you leave all check
boxes unchecked, you will be
prompted to accept a
connection to the root
certification authority during the
authentication process.
boxes unchecked, you will be
prompted to accept a
connection to the root
certification authority during the
authentication process.
13. Click
OK three times to close
the dialogs and save all the
settings until return to Network
Connections.
settings until return to Network
Connections.
14. Now the configuration for WPA
authentication is completed. And
you may start to use the
wireless device.
you may start to use the
wireless device.