Dynalink RTA1025W Benutzerhandbuch

ADSL Router User Manual

Support dying gasp

Maximum Rate: 24 Mbps for downstream and 1.2 Mbps for upstream

Wireless LAN Compliance

IEEE 802.11g and IEEE 802.11b

Data Rate: 54, 48, 36, 24, 18, 12, 9, 6 Mbps for 802.11g; 11, 5.5, 2, 1 Mbps for
802.11b

Modulation Technique: OFDM for 802.11g; CCK (11 Mbps, 5.5 Mbps) for
802.11b; DQPSK (2Mbps) for 802.11b; DBPSK (1 Mbps) for 802.11b

Network Architecture: infrastructure

Operating Frequency: 2.4 ~ 2.5 GHz

Operating Channels: depending on local regulations. For example, 11
Channels (Northern America), 13 Channels (Europe), and 14 Channels (Japan)

Support the selection of best quality channel automatically

RF Output Power: 13.5+/-1.5dBm for 802.11g; 17.5+/-1.5dBm for 802.11b

Antenna Connectors: Hardware diversity support. One external antenna and
one internal antenna are provided.

Coverage Area: 300 meters

Support WEP (Wired Equivalent Privacy) mechanism which uses RC4 with
64-bit or 128-bit key length

Support 802.1x and WPA/WPA2

Support the Access Control function: only registered WLAN clients are allowed
to associate to this device.

SSID can be hidden for the security issue (Don’t broadcast SSID).

Two SSIDs are supported currently. One SSID can be used for main wireless
network and the other SSID can be used for guest wireless network. Two
wireless networks can be configured in different wireless security level.

Support the Repeater function to extend the coverage area

Support wireless user isolation for the hotspot

Support Wireless QoS (WMM)

ATM Features

Compliant to ATM Forum UNI 3.1 / 4.0 Permanent Virtual Circuits (PVCs)

Support up to 16 PVCs for UBR, CBR, VBR-nrt, VBR-rt with traffic shaping

RFC2684 LLC Encapsulation and VC Multiplexing over AAL5

RFC2364 Point-to-Point Protocol (PPP) over AAL5

RFC2225 Classical IP and ARP over ATM

RFC2516 PPP over Ethernet: support Relay (Transparent Forwarding) and
Client functions

Support PPPoA or PPPoE Bridged mode (the IP address got from ISP can be
passed to the user’s PC and behave as the IP address of the user’s PC.)

OAM F4/F5 End-to-End/Segment Loopback Cells

Bridging Features

Supports self-learning bridge specified in IEEE 802.1d Transparent Bridging