GarrettCom 6K32FR Benutzerhandbuch

Seite von 75
Magnum 6K32F/FR/FC/FRC Managed Switch Installation and User Guide (05/08) 
connector functions as a fiber optic transceiver to support 10BASE-FX network 
segments. When installed in a Magnum 6K32F Series Managed Switch, the copper port 
supports the standard distance 100m on each port and the fiber port supports fiber optic
cable distances up to the IEE
 
E-standard 10Mbps distance limits, i.e., typically 2km at 
full-duple
10/100 LED indicates the speed, 100Mbps if the LED is ON, 10Mbps
 
2F 
ide 
lti-mode fiber. (Single-
ode for
t, and  
DX/HDX LED indicating full-duplex mode when lit (or half-duplex if off). 
are 
x and half-duplex. 
Each port has an Activity (ACT) LED indicating packets being received, a 
Link (LK) LED that indicates proper connectivity with the remote device when lit, and
FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). Th
  
 if it is OFF,. 
 
.2.1b  6KP4-F10ST, 4@10Mb multi-mode FX-ST “twist lock”  Module 
5
 
The Magnum 6KP4-F10ST is a 
10Mb multi-mode fiber module 
with 4 ST-Fiber ports. All four 
fiber ports are ST connectors 
and configured as 10Mb Half-
duplex by default. The 10Mb 
ST-fiber ports allow the user to
connect their legacy 10Mb 
network to the Magnum 6K3
Series switch. They also prov
a convenient way for the half 
duplex hub to connect to the switch through 10Mb fiber ports. It supports distances 
according to the 10Base-FL standard i.e, 2Km distance for mu
m
 10Km distance may be available as a special order). 
 
Each port has an Activity (ACT) LED indicating packets being received, a 
Link (LK) LED indicating proper connectivity with the remote device when li
F
 
5.2.1c  6KP4-FLSTFX, 2@10Mb and 2@100Mb multi-mode FX-ST “twist 
lock”  Module 
 
The Magnum 6KP4-FLSTFX is a combo fiber module with two 10Mb + two 
100Mb multi-mode fiber module for a total of 4 ST-Fiber ports. All four fiber ports 
ST connectors and configured as 10Mb Half-duplex by default for 10Mb fiber and 
100Mb Full duplex for the 100Mb fiber. The 10Mb ST-fiber ports allow the user to 
connect their legacy 10Mb network to the Magnum 6K32F Series switch. They also 
 
49 
www   GarrettCom   com
.
.