Fortinet 50B Benutzerhandbuch

This document contains the following chapters: 

•

 – Describes unpacking, setting up, and powering 

on a FortiGate unit.

•

 – Provides the factory default settings for the FortiGate unit

•

 – Provides an overview of the operating modes 

of the FortiGate unit and how to integrate the FortiGate unit into your network.

•

 – Describes how to configure and use a 

modem with the FortiGate-50A and FortiGate-50AM units.

•

 – Describes configuring a wireless network and 

postioning the FortiWiFi-50B unit for best reception.

•

 – Describes how to install, update, restore and test the 

firmware for the FortiGate device.

The following document conventions are used in this guide:

• In the examples, private IP addresses are used for both private and public IP 

addresses.

• Notes and Cautions are used to provide important information:

FortiGate documentation uses the following typographical conventions:

Note: This guide covers information on four FortiGate units; the FortiGate-50A, 
FortiGate-50B, FortiWiFi-50B and FortiGate-100. While most of the content applies to all 
the units, where information is specific to a certain model, an icon like the ones below will 
appear next to the content. 

50A

100

50B

WiFi-50B

Note: Highlights useful additional information. 

Caution: Warns you about commands or procedures that could have unexpected or 
undesirable results including loss of data or damage to equipment.