Fortinet 50B Benutzerhandbuch

Seite von 84
Factory defaults 
FortiGate-50A/50B, FortiWiFi-50B and FortiGate-100 FortiOS 3.0 MR4 Install Guide
01-30004-0265-20070831
29
Factory default Transparent mode network configuration
In Transparent mode, the FortiGate unit has the default network configuration 
listed in 
Table 9
.
Factory default firewall configuration
FortiGate firewall policies control how all traffic is processed by the FortiGate unit. 
Until firewall policies are added, no traffic can pass through the FortiGate unit. 
The factory default configuration contains one firewall policies to allows all traffic 
through the FortiGate unit. To allow specific traffic through the FortiGate unit, you 
can add firewall policies. See the 
 for information 
about adding firewall policies.
The following firewall configuration settings are included in the default firewall 
configuration to make it easier to add firewall policies.
Network Settings
Default Gateway (for default route)
192.168.100.1
Interface connected to external network 
(for default route) 
external
Default Route
A default route consists of a default gateway and the name of 
the interface connected to the external network (usually the 
Internet). The default gateway directs all non-local traffic to this 
interface and to the external network.
Primary DNS Server
65.39.139.53
Secondary DNS Server
65.39.139.63
Table 8: Factory default NAT/Route mode network configuration (Continued)
Table 9: Factory default Transparent mode network configuration 
Administrator account
User name:
admin
Password:
(none)
Management IP
IP:
0.0.0.0
Netmask:
0.0.0.0
DNS
Primary DNS Server:
65.39.139.53
Secondary DNS Server:
65.39.139.63
Administrative access
Internal
HTTPS, Ping
External
Ping
DMZ
HTTPS, Ping