Fortinet 50A/50B Benutzerhandbuch

config system dns

set primary <address_ip>
set secondary <address_ip>

end

config system dns

set primary 293.44.75.21
set secondary 293.44.75.22

end

Add a default route to configure where the FortiGate unit sends traffic that should 
be sent to an external network (usually the Internet). Adding the default route also 
defines which interface is connected to an external network. The default route is 
not required if the interface connected to the external network is configured using 
DHCP or PPPoE.

Set the default route to the Default Gateway IP address. Enter:

config router static

edit <seq_num>

set dst <class_ip&net_netmask>
set gateway <gateway_IP>
set device <interface>

end

To verify the connection, try the following: 

• ping the FortiGate unit
• browse to the web-based manager GUI
• retrieve or send email from your email account

If you cannot browse to the web site or retrieve/send email from your account, 
review the previous steps to ensure all information was entered correctly and try 
again. 

You are now finished the initial configuration of the FortiGate unit.

Example
If the default gateway IP is 10.10.1.2 and this gateway is connected to the 
external interface:

config router static

edit 1

set dst 0.0.0.0 0.0.0.0
set gateway 10.10.1.2
set device external

end

100

50B

WiFi-50B