Fortinet 50A/50B Benutzerhandbuch

To ensure proper security and protection of your network and its information, set 
the security options for the FortiWiFi-50B unit. 

Go to System > Wireless > Settings.

Enter an SSID.

Set the SSID Broadcast to either enable or disable. 

Select a Security mode.

Enter a key or pre-shared key depending on the Security Mode selected. 

Select the MAC Filter tab.

Enable MAC filtering if desired. 

Enter the MAC addresses and select to Allow or Deny. 

The FortiWiFi-50B provides WAN interfaces for Internet connections. You can 
configure the Internet connection for both wired networks and the wireless 
network through the WLAN interface. 

You can provide secure Internet access for wireless clients by creating firewall 
policies from the WLAN interface to the WAN1 or WAN2 interfaces. 

The following example creates a policy from the wireless clients (WLAN interface) 
to the Internet (WAN1 interface) using traffic shaping, firewall authentication and 
the default Strict content policy. 

Go to Firewall > Policy.

Select the blue arrow for WLAN to WAN1.

Select Create New. 

Configure the following settings and select OK: 

Note: You will need to distribute the information entered in step 2 and step 5 with the 
wireless users so they can connect to the wireless network. It is highly recommended you 
do not select “None”. Selecting None will leave your wireless network prone to hackers.

WLAN

WAN1

All

All

Always

ANY

ACCEPT

Enable

Strict