Gateway 9315 Benutzerhandbuch

www.gateway.com

4

System board timer not operational.

Possible system board malfunction. To 
eliminate the possibility of an add in-card 
problem, remove all expansion cards.

■

If the beep code occurs even when all 
expansion cards have been removed, the 
system board is at fault.

■

If the beep code does not occur when the 
expansion cards have been removed, one 
of the cards is causing the problem. Install 
the cards one at a time until the problem 
happens again. When the beep code 
returns, the most recent card you installed 
is at fault.

5

A processor on the system board generated 
an error.

Try replacing the processors with known 
good processors.

Same as for 4 beeps.

6

The keyboard controller (8042) may be 
defective. The BIOS cannot switch to 
Protected mode.

Remove the keyboard to see if the error goes 
away. If it does, try a known good keyboard.

Same as for 4 beeps.

7

General exception error (processor 
exception error).

Same as for 4 beeps.

Same as for 5 beeps

8

Display memory error (system video 
adapter).

If the system video adapter is an add-in card, 
replace or reseat the video adapter. If the 
video adapter is integrated into the system 
board, the board may be faulty. Try using an 
add-in card.

9

The ROM checksum value does not match 
the value encoded in the BIOS.

Same as for 4 beeps.

10

The shutdown register for CMOS RAM failed.

Same  as  for  4  beeps.

11

The cache memory test failed.

Same as for 4 beeps.