Panasonic ET5M series Benutzerhandbuch

 Compensates for the low frequency sound due to the distance between the 
speakers and the wall [Over 30cm] / [Up to 30cm]

● 

 If the back space between the TV and wall is over 30 cm, [Over 30cm] is 
recommended.

● 

 If the back space between the TV and wall is within 30 cm, [Up to 30cm] is 
recommended.

 Selects multiplex sound mode (if available)
 [Stereo]:  Use this normally.
 [Mono]:  When stereo signal cannot be received.
 [M1] / [M2]:  Available while mono signal is transmitted.

 Selects to fit the input signal [Digital] / [Analogue] (p. 82)
 [Digital]:  When sound is carried via the HDMI cable connection
 [Analogue]:  When sound is not carried via the HDMI-DVI adaptor cable 

connection

● 

 For HDMI input

 Press the OK button to reset the current Sound Mode, [Balance], 
[Headphone Volume] and [Surround] to the default settings

 Sets the network setting to use in your network environment (p. 59, 60)

 Sets to control the TV with the devices connected to the network (p. 58)

 Checks for available software updates from the Panasonic website

 Selects whether to give a notification message when new software is found via 
network [Off] / [On]

 Displays the network status (MAC Address, current network settings, etc.)

 Sets the duration of time until the TV automatically goes into Standby mode 
[Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes) (p. 20)

 Sets the duration of time that the TV will remain on when no operation is 
performed [Off] / [2] / [4] (hours)

● 

 Automatic input switching with the connected equipment affects this function 
and time-count will be reset.

● 

 The notification message will appear 3 minutes before going into Standby mode.