Juniper Networks M7i Benutzerhandbuch

Figure 5: Connect External Devices and PIC Cables to Router

1.

Turn off the power to the console or auxiliary device.

2.

Plug the female end of the RS-232 serial connector into the 

CONSOLE or

AUX/MODEM

 port.

3.

Use a 2.5 mm flat-blade screwdriver to tighten the screws on the connector.

4.

Connect the other end of the cable to the console or auxiliary device.

1.

Turn off the power to the networking device.

2.

Plug one end of the Ethernet cable (with RJ-45/RJ-45 connectors) into the 

MGMT

port on the Routing Engine.

3.

Plug the other end into the networking device.

WARNING: Do not look directly into a fiber-optic transceiver or into the ends of
fiber-optic cables connected to a transceiver. Fiber-optic transceivers contain laser
light sources that can damage your eyes.

Step 4: Connect External Devices and PIC Cables

■

9

Step 4: Connect External Devices and PIC Cables